Magic-force operator how to adjust the cam

All rights reserved.: Pablo Rodriguez.

magic-force operator how to adjust the cam

To stop the door. Configure settings as needed and press Update after each settings has been changed. Step 14: Setup the door type. A feature that allows the door to be actuated by a slight manual movement of the door--without the need for an approach sensor. Time starts when door begins to open. If the door is not operating correctly press Trouble Shoot to enter the Trouble Shooting menu.

204090B - MC521 Pro Control Box for Swing and Bifold Doors

Armando Ruiz. Displays Controller Status. Umar Shamsudin. Press OK. Step 14: Read the descriptions entirely before performing each step.

magic-force operator how to adjust the cam

Motor 1 Index Description 00 Open speed. On Magic-Swing operators.

Mc 521 Swing Manual 204027 c

Where a requirement exists in multiple standards. Reverse On Obstruction: A reverse-on-obstruction feature causes the door to reverse motion if an obstruction is met during door opening or closing.

magic-force operator how to adjust the cam

Registr Registr. Step 11: If the door requires additional changes to be made to the settings. Where a requirement exists in multiple standards. Refer to Figure I.

Stanley Access Technologies LLC

This prevents inadvertent changes to input values. Select MC521 Tool Box from the list of applications. Total time that the electric strike is unlocked is the lock delay plus the unlock time.

magic-force operator how to adjust the cam